在低点显示最大转折

方天问

老师好，自己做了一个zig转折指标，在转折低点显示转折力度，结果发现在较大转折时，小的转折也显示出来了，如图显示，求助老师帮忙改进一下；
当最大转折是”折5“的时候只显示”折5“；
当最大转折是”折30“的时候只显示”折30“，不用显示其他的小转折；

先提前谢谢老师，老师辛苦，提前给您拜年了！

以下是主图源码和天马精化的图片展示。


VAR90:=ZIG(3,90)>REF(ZIG(3,90),1) AND REF(ZIG(3,90),1)<REF(ZIG(3,90),2);
DRAWTEXT(VAR90,L*0.62,'折90'),COLORYELLOW;
VAR80:=ZIG(3,80)>REF(ZIG(3,80),1) AND REF(ZIG(3,80),1)<REF(ZIG(3,80),2);
DRAWTEXT(VAR80,L*0.66,'折80'),COLORYELLOW;
VAR70:=ZIG(3,70)>REF(ZIG(3,70),1) AND REF(ZIG(3,70),1)<REF(ZIG(3,70),2);
DRAWTEXT(VAR70,L*0.70,'折70'),COLORYELLOW;
VAR60:=ZIG(3,60)>REF(ZIG(3,60),1) AND REF(ZIG(3,60),1)<REF(ZIG(3,60),2);
DRAWTEXT(VAR60,L*0.74,'折60'),COLORYELLOW;
VAR50:=ZIG(3,50)>REF(ZIG(3,50),1) AND REF(ZIG(3,50),1)<REF(ZIG(3,50),2);
DRAWTEXT(VAR50,L*0.78,'折50'),COLORYELLOW;
VAR40:=ZIG(3,40)>REF(ZIG(3,40),1) AND REF(ZIG(3,40),1)<REF(ZIG(3,40),2);
DRAWTEXT(VAR40,L*0.82,'折40'),COLORYELLOW;
VAR30:=ZIG(3,30)>REF(ZIG(3,30),1) AND REF(ZIG(3,30),1)<REF(ZIG(3,30),2);
DRAWTEXT(VAR30,L*0.86,'折30'),COLORYELLOW;
VAR20:=ZIG(3,20)>REF(ZIG(3,20),1) AND REF(ZIG(3,20),1)<REF(ZIG(3,20),2);
DRAWTEXT(VAR20,L*0.90,'折20'),COLORYELLOW;
VAR10:=REF(ZIG(3,10),1)<ZIG(3,10) AND REF(ZIG(3,10),1)<REF(ZIG(3,10),2);
DRAWTEXT(VAR10,L*0.94,'折10'),COLORYELLOW;
VAR5:=REF(ZIG(3,5),1)<ZIG(3,5) AND REF(ZIG(3,5),1)<REF(ZIG(3,5),2);
DRAWTEXT(VAR5,L*0.98,'折5'),COLORYELLOW;

新人报道

VAR90:=ZIG(3,90)>REF(ZIG(3,90),1) AND REF(ZIG(3,90),1)<REF(ZIG(3,90),2);
VAR80:=ZIG(3,80)>REF(ZIG(3,80),1) AND REF(ZIG(3,80),1)<REF(ZIG(3,80),2);
VAR70:=ZIG(3,70)>REF(ZIG(3,70),1) AND REF(ZIG(3,70),1)<REF(ZIG(3,70),2);
VAR60:=ZIG(3,60)>REF(ZIG(3,60),1) AND REF(ZIG(3,60),1)<REF(ZIG(3,60),2);
VAR50:=ZIG(3,50)>REF(ZIG(3,50),1) AND REF(ZIG(3,50),1)<REF(ZIG(3,50),2);
VAR40:=ZIG(3,40)>REF(ZIG(3,40),1) AND REF(ZIG(3,40),1)<REF(ZIG(3,40),2);
VAR30:=ZIG(3,30)>REF(ZIG(3,30),1) AND REF(ZIG(3,30),1)<REF(ZIG(3,30),2);
VAR20:=ZIG(3,20)>REF(ZIG(3,20),1) AND REF(ZIG(3,20),1)<REF(ZIG(3,20),2);
VAR10:=REF(ZIG(3,10),1)<ZIG(3,10) AND REF(ZIG(3,10),1)<REF(ZIG(3,10),2);
VAR5:=REF(ZIG(3,5),1)<ZIG(3,5) AND REF(ZIG(3,5),1)<REF(ZIG(3,5),2);
QFZ:=IF(VAR90=1,VAR90,IF(VAR80=1,VAR80,IF(VAR70=1,VAR70,IF(VAR60=1,VAR60,IF(VAR50=1,VAR50,IF(VAR40=1,VAR40,IF(VAR30=1,VAR30,IF(VAR20=1,VAR20,IF(VAR10=1,VAR10,VAR5)))))))));
QFS:=IF(VAR90=1,'折90',IF(VAR80=1,'折80',IF(VAR70=1,'折70',IF(VAR60=1,'折60',IF(VAR50=1,'折50',IF(VAR40=1,'折40',IF(VAR30=1,'折30',IF(VAR20=1,'折20',IF(VAR10=1,'折10','折5')))))))));
DRAWTEXT(QFZ,L*0.98,QFS),COLORYELLOW;