请老师帮忙做个预警公式

龚生

请哪位老师帮忙作个预警公式，有“进”出现红箭头时的出击，在此先谢谢了：
MA5:MA(CLOSE,5),LINETHICK1,COLORGREEN;
MA10:MA(CLOSE,10),LINETHICK1,COLORRED;
_现价:CLOSE,COLORWHITE,NODRAW;
_10日涨跌%: (C-REF(CLOSE,10))/REF(CLOSE,10)*100,COLORGREEN,NODRAW;
给:=EMA(C,2),COLORRED;
力:=EMA(SLOPE(C,9)*20+C,37);
买:=CROSS(给,力);
卖:=CROSS(力,给);
DRAWICON(买,L*0.97,1);
DRAWTEXT(买,L*0.95,'进'),COLORYELLOW;
DRAWICON(卖,H*1.03,2);
DRAWTEXT(卖,H*1.08,'撤'),COLORWHITE;
STICKLINE(给>=力,LOW,HIGH,0.01,0),COLOR0000DD;
STICKLINE(给>=力,CLOSE,OPEN,2,1),COLORRED;
STICKLINE(给>=力,LOW,HIGH,0.01,0),COLOR0000DD;
STICKLINE(给>=力,CLOSE,OPEN,2,1),COLORRED;
STICKLINE(给<力,LOW,HIGH,0.01,0),COLORFFDD00;
STICKLINE(给<力,CLOSE,OPEN,2,0),COLORFFFF00;
STICKLINE(CROSS(给,力),OPEN,CLOSE,2.5,0),COLORYELLOW;
STICKLINE(CROSS(力,给),OPEN,CLOSE,2.5,0),COLORWHITE;

新朝阳

放选股公式里为预警条件即可
MA5:=MA(CLOSE,5);
MA10:=MA(CLOSE,10);
_现价:=C;
_10日涨跌%:=(C-REF(CLOSE,10))/REF(CLOSE,10)*100;
给:=EMA(C,2);
力:=EMA(SLOPE(C,9)*20+C,37);
进:CROSS(给,力);
卖:=CROSS(力,给);

龚生

谢谢老师辛勤奉献！

龚生

新朝阳 发表于 2015-11-14 01:11
放选股公式里为预警条件即可
MA5:=MA(CLOSE,5);
MA10:=MA(CLOSE,10);

老师谢谢你，劳烦你在帮我做个预警公式，就是出现红箭头出现时的出击，再次谢谢了

VAR1:=(2*CLOSE+OPEN)/3;
VAR2:=(CLOSE-MA(CLOSE,2))/MA(CLOSE,2)*100;
VAR3:=(EMA(VAR2,1)+EMA(VAR2,3)+EMA(VAR2,6))/2;
A1:=EMA(VAR3,2);
A2:=EMA(A1,2);
A3:=EMA(A2,2);
DRAWICON(CROSS(A1,A3),A3-2,1);
DRAWICON(CROSS(A3,A1),A3+2,2);
STICKLINE((A1 >= A3),A1,A3,4,1),COLORRED;
STICKLINE((A1 >= A3),A1,A3,4,1),COLORRED;
STICKLINE((A1 >= A3),A1,A3,4,1),COLORRED;
STICKLINE((A1 >= A3),A1,A3,4,1),COLORRED;
STICKLINE((A1 >= A3),A1,A3,4,1),COLORRED;
STICKLINE((A1 >= A3),A1,A3,4,1),COLORRED;
STICKLINE((A1 <= A3),A1,A3,4,1),COLORGREEN;
STICKLINE((A1 <= A3),A1,A3,4,1),COLORGREEN;
STICKLINE((A1 <= A3),A1,A3,4,1),COLORGREEN;
STICKLINE((A1 <= A3),A1,A3,4,1),COLORGREEN;
STICKLINE((A1 <= A3),A1,A3,4,1),COLORGREEN;
STICKLINE((A1 <= A3),A1,A3,4,1),COLORGREEN;

新朝阳

VAR1:=(2*CLOSE+OPEN)/3;
VAR2:=(CLOSE-MA(CLOSE,2))/MA(CLOSE,2)*100;
VAR3:=(EMA(VAR2,1)+EMA(VAR2,3)+EMA(VAR2,6))/2;
A1:=EMA(VAR3,2);
A2:=EMA(A1,2);
A3:=EMA(A2,2);


XG:CROSS(A1,A3);

龚生

老师请帮我再做一个预警公式，如图，
当日成本:=IF(C>REF(C,1),(3*H+4*C+3*OPEN+2*L)/12,(2*H+4*C+3*OPEN+3*L)/12);
疯牛线:=EXPMEMA(当日成本,3),LINETHICK1;
龙头线:=EXPMEMA(当日成本,8),LINETHICK2;
慢牛线:=EXPMEMA(当日成本,25),LINETHICK2;
生命线:=EXPMEMA(当日成本,79),LINETHICK3;
牛熊线:=EXPMEMA(当日成本,248),LINETHICK3;
V2:=EMA(当日成本,13)-EMA(当日成本,34);
V3:=EMA(V2,5);
CYC13:=0.01*EXPMA(AMOUNT,13)/EXPMA(VOL,13);
CYC34:=0.01*EXPMA(AMOUNT,34)/EXPMA(VOL,34);
CYS13:=(CLOSE-CYC13)/CYC13*100;
CYS34:=(CLOSE-CYC34)/CYC34*100;
CYC5:=0.01*EXPMA(AMOUNT,5)/EXPMA(VOL,5);
CYS5:=(CLOSE-CYC5)/CYC5*100;
DIVE:=0.01*EXPMA(AMOUNT,5)/EXPMA(VOL,5);
CYR5:=(DIVE/REF(DIVE,1)-1)*100;
(REF(CLOSE/REF(CLOSE,1),3)>1.099 OR REF(CLOSE/REF(CLOSE,1),6)>1.099 OR REF(CLOSE/REF(CLOSE,1),4)>1.099 OR REF(CLOSE/REF(CLOSE,1),5)>1.099 OR REF(CLOSE/REF(CLOSE,1),2)>1.099) AND CROSS(龙头线,LOW) AND UPNDAY(慢牛线,3);

CCI(3)在-100以上，也就是回马枪A+CCI（3）在-100以上，二个指标同时出现的出击，谢谢老师了！

新朝阳

1，对CCI（3）做了上线限定
2，软件中有CCI（3） 即参数3

当日成本:=IF(C>REF(C,1),(3*H+4*C+3*OPEN+2*L)/12,(2*H+4*C+3*OPEN+3*L)/12);
疯牛线:=EXPMEMA(当日成本,3),LINETHICK1;
龙头线:=EXPMEMA(当日成本,8),LINETHICK2;
慢牛线:=EXPMEMA(当日成本,25),LINETHICK2;
生命线:=EXPMEMA(当日成本,79),LINETHICK3;
牛熊线:=EXPMEMA(当日成本,248),LINETHICK3;
V2:=EMA(当日成本,13)-EMA(当日成本,34);
V3:=EMA(V2,5);
CYC13:=0.01*EXPMA(AMOUNT,13)/EXPMA(VOL,13);
CYC34:=0.01*EXPMA(AMOUNT,34)/EXPMA(VOL,34);
CYS13:=(CLOSE-CYC13)/CYC13*100;
CYS34:=(CLOSE-CYC34)/CYC34*100;
CYC5:=0.01*EXPMA(AMOUNT,5)/EXPMA(VOL,5);
CYS5:=(CLOSE-CYC5)/CYC5*100;
DIVE:=0.01*EXPMA(AMOUNT,5)/EXPMA(VOL,5);
CYR5:=(DIVE/REF(DIVE,1)-1)*100;
CCI(3),DRAWNULL;
X:=(REF(CLOSE/REF(CLOSE,1),3)>1.099 OR REF(CLOSE/REF(CLOSE,1),6)>1.099 OR REF(CLOSE/REF(CLOSE,1),4)>1.099 OR REF(CLOSE/REF(CLOSE,1),5)>1.099 OR REF(CLOSE/REF(CLOSE,1),2)>1.099) AND CROSS(龙头线,LOW) AND UPNDAY(慢牛线,3);
XG:X AND CCI>-100 AND CCI<-20;

新朝阳

软件中有CCI（3） 即参数3
cci(3)未设上限


当日成本:=IF(C>REF(C,1),(3*H+4*C+3*OPEN+2*L)/12,(2*H+4*C+3*OPEN+3*L)/12);
疯牛线:=EXPMEMA(当日成本,3),LINETHICK1;
龙头线:=EXPMEMA(当日成本,8),LINETHICK2;
慢牛线:=EXPMEMA(当日成本,25),LINETHICK2;
生命线:=EXPMEMA(当日成本,79),LINETHICK3;
牛熊线:=EXPMEMA(当日成本,248),LINETHICK3;
V2:=EMA(当日成本,13)-EMA(当日成本,34);
V3:=EMA(V2,5);
CYC13:=0.01*EXPMA(AMOUNT,13)/EXPMA(VOL,13);
CYC34:=0.01*EXPMA(AMOUNT,34)/EXPMA(VOL,34);
CYS13:=(CLOSE-CYC13)/CYC13*100;
CYS34:=(CLOSE-CYC34)/CYC34*100;
CYC5:=0.01*EXPMA(AMOUNT,5)/EXPMA(VOL,5);
CYS5:=(CLOSE-CYC5)/CYC5*100;
DIVE:=0.01*EXPMA(AMOUNT,5)/EXPMA(VOL,5);
CYR5:=(DIVE/REF(DIVE,1)-1)*100;
CCI(3),DRAWNULL;
X:=(REF(CLOSE/REF(CLOSE,1),3)>1.099 OR REF(CLOSE/REF(CLOSE,1),6)>1.099 OR REF(CLOSE/REF(CLOSE,1),4)>1.099 OR REF(CLOSE/REF(CLOSE,1),5)>1.099 OR REF(CLOSE/REF(CLOSE,1),2)>1.099) AND CROSS(龙头线,LOW) AND UPNDAY(慢牛线,3);
XG:X AND CCI>-100;

龚生

新朝阳 发表于 2015-11-25 19:45
软件中有CCI（3） 即参数3
cci(3)未设上限

老师你好！公式不能通过

新朝阳

啊如在条件选股里是多了个输出

当日成本:=IF(C>REF(C,1),(3*H+4*C+3*OPEN+2*L)/12,(2*H+4*C+3*OPEN+3*L)/12);
疯牛线:=EXPMEMA(当日成本,3),LINETHICK1;
龙头线:=EXPMEMA(当日成本,8),LINETHICK2;
慢牛线:=EXPMEMA(当日成本,25),LINETHICK2;
生命线:=EXPMEMA(当日成本,79),LINETHICK3;
牛熊线:=EXPMEMA(当日成本,248),LINETHICK3;
V2:=EMA(当日成本,13)-EMA(当日成本,34);
V3:=EMA(V2,5);
CYC13:=0.01*EXPMA(AMOUNT,13)/EXPMA(VOL,13);
CYC34:=0.01*EXPMA(AMOUNT,34)/EXPMA(VOL,34);
CYS13:=(CLOSE-CYC13)/CYC13*100;
CYS34:=(CLOSE-CYC34)/CYC34*100;
CYC5:=0.01*EXPMA(AMOUNT,5)/EXPMA(VOL,5);
CYS5:=(CLOSE-CYC5)/CYC5*100;
DIVE:=0.01*EXPMA(AMOUNT,5)/EXPMA(VOL,5);
CYR5:=(DIVE/REF(DIVE,1)-1)*100;
A:=CCI(3);
X:=(REF(CLOSE/REF(CLOSE,1),3)>1.099 OR REF(CLOSE/REF(CLOSE,1),6)>1.099 OR REF(CLOSE/REF(CLOSE,1),4)>1.099 OR REF(CLOSE/REF(CLOSE,1),5)>1.099 OR REF(CLOSE/REF(CLOSE,1),2)>1.099) AND CROSS(龙头线,LOW) AND UPNDAY(慢牛线,3);
XG:X AND A>-100;